EPOXY FLOORING IN TRUMBULL, CT
Serving Connecticut and surrounding areas.
Or reach us out at (475)203-6216 for a free consultation
Your Garage Deserves Better Than Bare Concrete
If you've ever pulled into your garage and winced at the oil stain by the door, the chalky salt residue tracked in every winter, or the dusty grey concrete that never quite looks clean no matter how many times you sweep it, you already know why homeowners look into epoxy. Bare concrete cracks, stains, and pits over time, and it only gets worse with every Connecticut winter of road salt and de-icer dragged in on your tires.
Eastwood Group has been coating garage floors across Fairfield County for years, and we know what a Trumbull garage goes through, from Tashua driveways to weekend trips out to Indian Ledge Park and back. A flake epoxy system seals out the chemicals, oil, and salt that break concrete down, and it looks sharp doing it.
If your garage floor needs the same treatment, call or text (475) 203-6216. No charge, no pressure, just a straight answer on what it'll take and what it'll cost.
Project Spotlight
Location: Trumbull, CT
Service: Garage epoxy flooring (epoxy flake system)
Size: Approximately 350 sq ft garage
Material: Grey epoxy base coat with decorative flake blend, clear epoxy protective topcoat
Before / After
The garage started as plain, unsealed concrete, the kind that stains the first time a car leaks a drop of oil and never quite looks clean again. With a firm two-week move-in deadline, every step had to be sequenced tightly: floor leveling and prep, sealing, the grey base coat, the flake broadcast, and the clear topcoat, each needing its own cure window before the next step could start.
There was no room for a delayed step to push the whole schedule past move-in day. The result is a grey and blue-grey flake floor that reads clean and finished from the moment the garage door opens, durable enough for daily parking and built to shrug off winter salt instead of staining under it.
Floor Prep and Leveling
Before any coating goes down, the concrete gets prepped and leveled, grinding away old residue, filling any low spots or cracks, and confirming the slab is clean and dry enough for the epoxy to bond properly. Skipping or rushing this step is the most common reason garage coatings fail early, so it's not a step we compress even on a tight timeline.
Sealing and Grey Base Coat
Once the concrete is ready, a sealing pass locks down the surface before the grey epoxy base coat goes on. This base layer is what gives the floor its foundation color and its first layer of chemical and moisture resistance.
Clear Epoxy Topcoat
A clear epoxy topcoat seals everything underneath it, locking in the flakes and giving the floor its final protective layer against oil, grease, road salt, and daily wear. This topcoat is what does the heavy lifting against Connecticut winters specifically, it's the layer standing between the floor and whatever gets tracked in off the driveway.
Flake Broadcast
While the base coat is still workable, decorative flakes are broadcast across the surface by hand to build the grey/blue-grey blended look. This step is also functional, the flake texture adds a bit of grip underfoot, not just visual interest.
Our Flooring Services
Eastwood Group is a full-service flooring contractor. In addition to installation projects like this one, we offer:
FAQHow long does an epoxy flake garage floor take to install?
1
A typical single or two-car garage epoxy flake system, prep through final cure, takes about one to two weeks depending on size and floor condition.
Larger garages, extensive concrete repair, or humid conditions that slow curing can extend that window — worth confirming on a walkthrough if you're working against a move-in date.
Can epoxy flooring really hold up to Connecticut road salt and winters?
2
Yes. A properly cured epoxy flake system resists road salt, de-icing chemicals, oil, and moisture significantly better than bare or painted concrete.
Bare concrete is porous and absorbs salt and oil, which is what causes the staining and pitting homeowners usually want to fix in the first place.
Light foot traffic is generally fine within 24-48 hours, but full vehicle weight typically needs about 5-7 days for a complete chemical cure.
Parking too early is one of the more common ways a fresh coating gets marked or dented before it's fully hardened.
How soon can I park my car on a new epoxy floor?
3
Does my garage floor need to be in good shape before epoxy can go down?
4
The concrete needs to be clean, dry, and properly ground or etched first — moisture, cracks, and old sealers are the top reasons coatings fail to bond.
A quick inspection ahead of time catches most of these issues before they become a problem mid-installation.
Free Estimate in 24h
If you're planning a Garage Floor Coating in Trumbull, we'll be glad to visit to evaluate and put together a plan.